Manually adjusted
Single Position Triple Torch Oxyfuel Bevel Unit for straight line bevels with
manual ignition and gas adjustment. Bevels can be cut in the X axis only.
Cutting a “V”, “Y”, or “K” cross section in one pass, the manually adjusted
Triple Torch Oxyfuel Unit is designed to make a bevel cut in the longitudinal
(X) axis. Height sensing is achieved by an electromechanical device that rides
on the plate.


Messer Cutting Systems, Inc.

W141 N9427 Fountain Blvd.
Menomonee Falls, WI 53051


+1 262-255-5520
+1 262-255-5170
Contact Us



Key Features:

  • Provides plate squaring and weld preparation edges.
  • Bevel angles up to 45.°
  • Torches may be adjusted from .375” (9.5 mm) to several inches apart using re-trackable dove-tail horizontal slides providing for a wide range of bevel angles that can be cut on a variety of material thicknesses.
  • Height control is locked out when the electro-mechanical devise runs off the plate, maintaining proper height through the end of the cut.
  • Often used in combination with a Three Position Oxyfuel Bevel Unit to accurately establish plate width.